Hisson Plastic Machinery Co., Ltd. 

Home  >  PRODUCT  >  PET preform injection moulding machine  >  2280Kn PET injection molding machine for 28mm PCO water bottle preform
这里可以自定义设置
2280Kn PET injection molding machine for 28mm PCO water bottle preform
B站不支持收货地址
B站不支持库存规格
Model NO.
HI-SV/P228 IMM
MOQ
1 SET
Payment
T/T or Negotiable
Place of Origin
Ningbo,China
Delivery Time
40-45 days after receiving deposit
参数暂无数据
多属性暂无数据
B站不支持优惠卷

Add success, do you want to check your shopping cart?

暂无分享
B站不支持产品保障
这里可以自定义设置
这里可以自定义设置

DESCRIPTION

 

HI-SV/P228 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, is available, this machine is used to produce PET performs with weight 5g-800g, neck size 8mm to 150mm.  

 

HI-SV/P228 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.

 

Special designed points for PET(for HI-P series injection molding machine) 

Characteristics of PET resin

1. melting point: 250℃-260℃, molding temperature scope of PET is from 255℃-290℃, improved GF-PET can reach 290℃-315℃.

2. Low viscosity degree.

3. Strong moisture absorbing ability.

 

Our machine’s special design for PET 

L/D:21, this is the standard parameter of our PET series injection molding machine.

Enlarged screw diameter and length.

Increased oil pump’s power.

Increased heating ring’s power.

Detailed information
Machine main components adopt world famous brand, e.g.
Controller:TECHMATION (TAIWAN)
Low voltage contactor:SCHNEIDER(FRANCE)
Low voltage air switch:SCHNEIDER(FRANCE)
Proportional Valve:Dofluid HNC(TAIWAN)
Oil pump:VICKERS(USA)
Directional Valve:VICKERS(USA)
Induction travel switch:OMORON (JAPAN)
Inductor potentiometer:FORT(USA)
Servo system components
PLC:   Taiwan TECHMATION controller Driver:Taiwan Delta
Oil pump:Japan SumitomoServo motor:Italy PHASE
这里可以自定义设置

product  specifications

HI-SV/P228Parameters (Special design for PET)
TECHNICAL PARAMETER TABLEUnit
INJECTION UNIT
SCREW DIAMETERmm60
SCREW L/D RATIOL/D21
SHOT VOLUME(THEORETICAL)cm3780
INJECTION WEIGHT(PET)g826
INJECTION PRESSUREMpa147
INJECTION RATEg/s273
PLASTICIZING CAPACITYg/s49
SCREW SPEEDrpm0-180
CLAMPING UNIT
CLAMP FORCEKn2280
OPEN STROKEmm480
MAX.MOULD HEIGHTmm550
MIN.MOULD HEIGHTmm200
SPACE BETWEEN TIE BARSmm510×510 (W×H)
EJECTOR FORCEKn65
EJECTOR STROKEmm140
GENEREL
EJECTOR NUMBERn9
PUMP PRESSUREMpa16
PUMP MOTOR POWERKW22
HEATING POWERKW16.5
MACHINE DIMENSIONm6.0×1.4×2.2(L×W×H)
MACHINE WEIGHTT6.9
Hopper CapacityL50
Oil Tank CapacityL320
这里可以自定义设置
这里可以自定义设置
Product Message
Submit successfully
We will review as soon as possible
Chat Online 编辑模式下无法使用
Chat Online inputting...