Hisson Plastic Machinery Co., Ltd. 

Home  >  PRODUCT  >  PET preform injection moulding machine  >  3980Kn PET injection molding machine for 5 gallon 750g preform
这里可以自定义设置
3980Kn PET injection molding machine for 5 gallon 750g preform
B站不支持收货地址
B站不支持库存规格
Model NO.
HI-SV/P398 IMM
MOQ
1 SET
Payment
T/T or Negotiable
Place of Origin
Ningbo,China
Delivery Time
40-45 days after receiving deposit
参数暂无数据
多属性暂无数据
B站不支持优惠卷

Add success, do you want to check your shopping cart?

暂无分享
B站不支持产品保障
该产品后台详情无内容
这里可以自定义设置
这里可以自定义设置

DESCRIPTION

 

HI-SV/P398 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 23:1 / 25:1, is available, this machine is used to produce PET performs with weight 5g-800g, neck size 8mm to 150mm.  

 

HI-SV/P398 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.

 

Special designed points for PET(for HI-P series injection molding machine) 

Characteristics of PET resin

1. melting point: 250℃-260℃, molding temperature scope of PET is from 255℃-290℃, improved GF-PET can reach 290℃-315℃.

2. Low viscosity degree.

3. Strong moisture absorbing ability.

 

Our machine’s special design for PET 

L/D:23/25, this is the standard parameter of our PET series injection molding machine.

Enlarged screw diameter and length.

Increased oil pump’s power.

Increased heating ring’s power.

Detailed information
Machine main components adopt world famous brand, e.g.
Controller:TECHMATION (TAIWAN)
Low voltage contactor:SCHNEIDER(FRANCE)
Low voltage air switch:SCHNEIDER(FRANCE)
Proportional Valve:Dofluid HNC(TAIWAN)
Oil pump:VICKERS(USA)
Directional Valve:VICKERS(USA)
Induction travel switch:OMORON (JAPAN)
Inductor potentiometer:FORT(USA)
Servo system components
PLC:   Taiwan TECHMATION controller Driver:Taiwan Delta
Oil pump:Japan SumitomoServo motor:Italy PHASE
这里可以自定义设置

product  specifications

HI-SV/P398Parameters (Special design for PET)
TECHNICAL PARAMETER TABLEUnit
INJECTION  UNIT
SCREW DIAMETERmm80
SCREW L/D RATIOL/D23/25
SHOT VOLUME(THEORETICAL)cm32172
INJECTION WEIGHT(PET)g2300
INJECTION PRESSUREMpa152
INJECTION RATEg/s446
PLASTICIZING CAPACITYg/s70
SCREW SPEEDrpm0-165
CLAMPING  UNIT
CLAMP FORCEKn3980
OPEN STROKEmm700
MAX.MOULD HEIGHTmm800
MIN.MOULD HEIGHTmm280
SPACE BETWEEN TIE BARSmm720×720 (W×H)
EJECTOR FORCEKn110
EJECTOR STROKEmm160
GENEREL
EJECTOR NUMBERn13
PUMP PRESSUREMpa16
PUMP MOTOR POWERKW37
HEATING POWERKW24.8
MACHINE DIMENSIONm7.1×1.9×2.5(L×W×H)
MACHINE WEIGHTT15.7
Hopper CapacityL50
Oil Tank CapacityL750

product  details

Injection Unit

This unit is composed of plasticizing, material feeding, injection base, pre-plasticizing motor, whole forward-backward cylinder etc., thereinto, injection and mold moving is driven by oil cylinder, and the plasticizing will be realized by screw which is actuated by oil motor directly. Our machine’s injection unit with the advantages as compact structure, reasonable composition, equal plasticizing, high injection press and high speed, very suitable for producing high quality products.

Clamping Unit

Injection unit is composed of mold clamping oil cylinder, mold adjusting device, frontal and rear mold platen, stretch bar, elbow jointed bar frame, moving platen, safety device, central hydraulic ejector etc.

Control Unit

Our standard machine is for 380v/50hz/3phases, the operation power supply is 24v, also we can adjust according to the different power supply standard in different areas.

这里可以自定义设置
这里可以自定义设置
Product Message
Submit successfully
We will review as soon as possible
Chat Online 编辑模式下无法使用
Chat Online inputting...