Plastic model products now doing more and more entrepreneurs, so here is very effect of injection mold
So, in the process of injection molding machine
, we use daily maintenance is very important, which directly affect the service life of the machine.
The following several methods origin teach everybody.
Check before use: 1.
The fuel tank inspection.
Determine within the oil standard.
Of heat chamber and the oil temperature of the inspection.
Should be preheated oil indoor low temperature condition.
Indoor temperature, heat treatment.
If the pressure gauge inspection, swing is serious, the state back to zero and mileage.
The temperature control system.
Use check: 1.
Startup overflow valve switch to the lowest pressure.
Check and adjust the regulation of overflow valve pressure, whether continuous uniform lift, all is well and then to set pressure.
Oil pump, oil casing, electromagnet, oil temperature is 20 degrees -
50 degrees is normal, the pump shell temperature 10 degrees - higher than room temperature
30 degrees are also normal.
Check the oil situation.
Noise vibration tests.
Pressure gauge check.
The condition of the electrical components; safety device reliability tests.
Synfuels fiasco column cylinder components of fastening nut screw is loose.
Hisson Plastic Machinery Co., Ltd. is deemed as one of the leading provider of Product products in China.
If you would like a great tip on where you can get Product manual blow molding machines for a great price, check out Hisson Plastic Machinery. Hisson Plastic Machinery Co., Ltd. is committed to serving globally recognized . Quality is guaranteed here. Make your wise decision.
Establish a unique brand as Hisson that cuts through the clutter, and you'll get you the capital you need to get moving.