injection molding machine manufacturers | Hisson Plastic Machinery Co., Ltd. 

The centralized feeding fan of injection molding machine

by:Hisson     2020-01-14

The functional characteristics of the centralized feeding fan of the injection molding machine: 1.  It has a dual-purpose function, and the same product has both suction and blowing functions. And can also use both suction and blowing functions. 2.  Oil-free operation is adopted to make the air output by the blower cleaner and purer. 3.  High pressure, large air volume, low noise and light machine weight. The gap between the rotor and the rotor of the annular high-pressure blower and the rotor and the body is small, which greatly strengthens the pressure of the wind. 4.  Special blade design is adopted, which has high manufacturing accuracy, wear resistance, high wind power and long service life. 5, reliable quality, can work normally at an altitude of 5000 above sea level, high temperature resistance, cold resistance. 6, maintenance-free use, within the warranty period, basically do not need any maintenance. The impeller of the vortex air pump consists of dozens of blades, which is similar to the impeller of a huge gas turbine. The air in the middle of the impeller blade is subjected to centrifugal force and moves to the edge of the impeller, where the air enters the circular cavity of the pump body and circulates again from the starting point of the blade in the same way. The circulating airflow generated by the rotation of the impeller leaves the air pump with extremely high energy for use. The fan adopts a special motor with compact structure, small volume, light weight, low noise, and no water or oil in the air source. Vortex air pump is applied to industry and agriculture, covering infrastructure, environmental protection industry, automobile industry, electroplating industry, aquaculture industry, industrial dust collection, packaging machinery industry, printing machinery industry, plastic industry, chemical industry, food, pharmacy, medical treatment, electrical and electronic, light industry textile, ship and railway, high pressure blower make our production more environmentally friendly. Precautions for installation: 1. Installation location: it must be installed indoors without wind and rain. Ambient temperature: 40 ° C 3. Relative humidity: 80% to 4. Air quality: if the air contains corrosive or flammable gases such as acid and alkali, it should not be transported by high-pressure blower to avoid danger. Dust protection: a large amount of dust, powder or fiber should be avoided.  If it is necessary to use it in such occasions, please install a filter, and regularly clean the dust attached to the filter screen and the high-pressure blower. Ventilation and heat dissipation: please choose to use in a well-ventilated place, not in a closed room or a closed box. Placement space: for the convenience of column maintenance or repair, please avoid installing too small a location 8. Avoid vibration: Please install in a place without vibration; If the vibration of the place is inevitable, anti-vibration measures must be installed to prevent the high-pressure blower from being damaged by external vibration.                                

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...