injection molding machine manufacturers | Hisson Plastic Machinery Co., Ltd. 

Vertical injection molding machine and the characteristics of horizontal injection molding machine

by:Hisson     2020-08-17
Injection molding machine according to the injection device and clamping device arrangement, can be divided into vertical, horizontal and vertical lie compound. Below by vertical injection molding machine manufacturer for you to explain in detail the characteristics of their respective characteristics of vertical injection molding machine 1. 処 injection device and clamping device in the same vertical center line, and the mold is up and down along the open and close direction. It covers an area of only about half of the horizontal machine, therefore, converted to cover an area of about twice as productive. 2. Easy to insert molding. Because the mold surface up, insert into the positioning to facilitate. Using the template template moving model, and pull belt conveyer combined with mechanical hand, can be easy to realize automatic insert molding. 3. Mould by horizontal template bearing the weight of the upper and lower opening and closing action, will not happen similar horizontal machine caused by mold gravity before fall, make the template can not be open and close. To promote persistent maintain machinery and mould precision. 4. Through simple manipulator remoable various plastic mold, precision molding. 5. General around the clamping device for the open open, easy to configure various types of automatic device, adapted to the complex and sophisticated automatic molding machine. 6. Pulley conveying device is easy to implement string among mould installation, easy to realize automatic molding production. 7. To ensure the resin fluidity in the mould and die temperature distribution uniformity. 8. Equipped with rotary table, mobile and inclined mesa mesa, easy to insert molding, molding mould combination. 9. Small batch trial production, mold simple structure, low cost, and convenient for unloading. 10. Has stood the test of many earthquakes, vertical machine because of the low center of gravity, the relative horizontal machine vibration resistance is better. The characteristics of horizontal injection molding machine 1. Mainframe is low due to the fuselage, the resettlement of plant height restrictions. 2. Machines can be automatically dropped occasions, do not need to use robots also can realize automatic forming. 3. Low due to the fuselage, easy feeding, facilitate maintenance. 4. Mould should be through the crane installation. 5. Many sets of parallel arrangement, facilitate moulded by the conveyor belt to collect the packing.
This is an global standard which acts as a form of promise that Hisson Plastic Machinery Co., Ltd. manufatures according to the finest quality standards.
Hisson Plastic Machinery Co., Ltd. is working with the best teams, aligned with international standards and practices to focus on R&D and manufacture of products, and are continuously launching new products in the market. Get to know us at Hisson Plastic Machinery.
Based on the Product, here are the top compliance challenges businesses face, and what you can do to make them easier on ourselves.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...